Welcome to Black Herron!
The Redding Competition Seater Die has solved the concentricity problems inherent in other seating dies of this type. Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to "float" on ...
Redding Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. Each Body Die is made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
Redding Taper Crimp Dies were designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable. Also available for some revolver and bottleneck rifle cartridges, for those who prefer the uniformity of a taper crimp. The taper crimp gently tapers tighter and tighter to hold the bullet in place....
Redding Full Length Die for Bottleneck Cases - The full length (FL) resizing die contains a decapping rod assembly with a neck expander (size button).
Redding Neck Sizer Dies only size the neck of your bottleneck cases to prolong brass life and improve accuracy. It is important to note that since these dies size only the neck and not the shoulder or body, fired cases should not be interchanged between rifles of the same caliber. Made in the USA.